Food Grade Oil
Copyright © 2013 Simmons Synthetics. All rights reserved.
SERVING THE LUBE WORLD ONE DROP AT A TIME!
Simmons Synthetics synthetic Food Grade oils are made from the highest quality base stocks and additives. Depending on the product these oils are used in gears, bearings, compressors, hydraulic systems, and in blowers in food packaging and food service industry were incidental food contact is possible. The base stocks of these products include polyglycol, synthetic hydrocarbon, synthesized hydrocarbon based oils, please check the product page bellow for information on that products base stock and recommended application
ALPG Food Grade Series ~ synthetic gear oils are polyglycol-based products for use in enclosed gear, bearings, and compressors where conditions demand the unique properties of these fluids.
Use these lubricants where there is the potential for incidental contact with food or food packaging.
Better wear protection, thermal and oxidation stability, and reduced sludge
and deposit formation insure enhanced performance when compared
with petroleum-based lubricants. These gear oils comply
with the requirements of 21 CFR 178.3570 FDA regulations and
meet USDA 1998 (H-1) guidelines (lubricants with incidental
food contact) for use in food plants. Do not add directly to food.
The ALPG Food Grade Series gear oils are incompatible
with petroleum oils. Care should be taken to prevent the two
types of oils from being mixed.
The ALFG Series Compressor Oils are specially designed for rotary screw, vane and reciprocating compressors being used in the food
service industry. These fully synthetic compressor Oils are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact). AL FG Series Compressor Oils are Kosher approved.
The ALFG Series Compressor Oils are formulated from the highest quality
synthesized hydrocarbon fluids available. The special additive system
is blended with the synthetic base-fluid to provide extended oil life
and to protect against wear, rust and corrosion.
ALH FG Series ~ hydraulic oils are formulated specially for hydraulic systems operating in the food service, beverage, and packaging industry. These fully synthetic hydraulic oils are NSF Registered and meet USDA 1998 (H-1) guidelines (oils with incidental food contact). ALH FG Series hydraulic oils are Kosher approved.
ALH FG hydraulic oils are fortified with oxidation inhibitors,
corrosion inhibitors, as well as anti-wear additives to enhance the
superior qualities offered by the synthetic hydrocarbon base stock.
They are extended life lubricants and have the same excellent compatibility as the Simmons Synthetics ALH Series hydraulic oils.
ALBL Food Grade Series
ALBL Food Grade Series synthetic blower lubricants are formulated
to provide maximum lubrication protection and service for all
positive displacement blowers including Roots, Gardner-Denver,
Sutorbilt and Duroflow. Advantages over petroleum lubricants
include extended lubricant life (up to 4,000 hours with oil analysis),
reduced operating temperatures, better corrosion protection,
enhanced low and high temperature lubricating properties, longer
blower life with reduced wear, and lower maintenance costs. The
ALBL synthetic blower lubricants exceed the specification requirements for all of the major manufacturers of positive displacement blowers
and are compatible with most commonly used seal materials.
These fully synthetic blower lubricants are NSF Registered and meet
USDA 1998 (H-1) guidelines (lubricants with incidental food
contact). ALBL Food Grade Series lubricants are Kosher approved.
ALHP FG Series ~ hydraulic oils are formulated specially for hydraulic systems operating in the food service, beverage, and packaging industries. ALHP FG Series hydraulic oils are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact). In addition, these hydraulic oils are Kosher approved. ALHP FG Series hydraulic oils are fortified with oxidation inhibitors, corrosion inhibitors, as well as anti-wear additives to enhance the superior qualities offered by the Food Grade base stock.
ALHP FG Series hydraulic oils are ideal for the lubrication of production
equipment in beverage canning, bottling operations, meat and poultry
processing, dairy operations, fruit and vegetable processing, bakeries, and
Replacement for American Synthol SFG 100, SFG 200, SFG 250, SFG 300 SFGL 32SFGL 46, SFGL 68, SFGL 100,Anderol 6068, 6100, Anderol 6150, anderol 6220, anderol 6320, anderol 6460, anderol 6680, Anderol FG XL 32, FG XL 46, FG XL 68, FG XL 100, Anderol FGC 15, FGC 32, FGC 46, FGC 68, FGC 100, FGH 22, FGH 32, FGH 46, FGH 68, FGH 100,Anderol PQ AA 10, PQ AA 20, PQ AA 32, PQ AA 40,PQ AA 80, PQ AA 90, PQ AA 140, PQ AA 250, PQ AA 680, Atlas Copco GA FG, Roto FG Extend, Roto Foodgrade Fluid, Gardner Denver Chamlub food grade, Rotorlub 4000 FG, Citgo, Chevron, CompAir CSS 20, CompAir SSL-35F, SSL-50, Exxon Mobil DTE FM 32, Mobil DTE FM 46, Mobil DTE FM 68, Mobil DTE FM 100, Quincy Quinsyn F, Quincy Quinsyn FG46, Gardner Denver Aeon AC FG, Ingersoll Rand Ultra FG, Ingersoll Rand X-Tend H-1f Food Grade 32, ingersoll rand X-Tend H-1F Food Grade 46