Ultimate Industrial Descaler is a water-based solvent containing wetting agents, corrosion inhibitors, anti-foam and degreasing compounds. It is designed to penetrate and remove encrusted lime scale, rust, corrosion products and dirt from water-wetted surfaces in process equipment, e.g., exchangers and liquid-ring vacuum pumps. Ultimate Industrial Descaler can also be used to remove lime scale in commercial and industrial applications. With a pleasant citrus-lime fragrance that masks the obnoxious odors normally associated with dissolving water scale and corrosion, Ultimate Industrial Descaler changes from a pale yellow color to a vivid bluish-purple color when it is spent. It is low foaming and quickly releases the carbon dioxide (CO2) gas generated by the reaction of lime scale with Ultimate Industrial Descaler.
Why use Ultimate Industrial Descaler?
The formation of scale in process equipment increases pressure drop, requiring more pumping horse-power to maintain volumetric throughput. Heat transfer surfaces gradually become fouled and thermal efficiencies decrease. Pieces of scale attach themselves to rotating equipment, i.e., pumps and mixers, and cause bearing failure . If these problems sound familiar, then you know why you need to periodically clean the lime scale and rust out of the system with Ultimate Industrial Descaler.
Ultimate Industrial Descaler provides an excellent method to clean equipment without expensive disassembly . In many applications, the cleaning can be accomplished while the system is in operation . Ultimate Industrial Descaler can remove scale in small, inaccessible places that cannot otherwise be cleaned.
Why does Ultimate Industrial Descaler change color?
Ultimate Industrial Descaler comes in a pale yellow color that changes to a deep bluish-purple color when it is spent . There are four important advantages to this color change:
1. Does not require pre-mixing; does not separate.
2. Effective-one gallon dissolves approximately 1.5 lbs. of scale.
3. Safe-no special shipping, transportation or handling required.
4. Rapidly biodegradable.
5. Changes color from amber to purple when spent (pH 5.8).
6. Non-Hazardous, Non-Corrosive, Non-Flammable.
7. Pleasant has a pleasant sassafras odor, free rinsing and low foaming.
8. Re-usable, if not spent.
Where is Ultimate Industrial Descaler used?
Ultimate Industrial Descaler is especially designed to safely remove lime deposits or water scale from:
• Power plant boilers and piping systems and all types of evaporating equipment
• Equipment in refineries, utility companies, paper mills, chemical plants, foundries, rubber plants and other industries
• Food processing plants, meat packing plants and breweries
• Sewage disposal plants, water treating facilities and other municipal water handling operations
• Any equipment that is water cooled in any manner
Ultimate Industrial Descaler is not recommended for use on aluminum, certain aluminum alloys, zinc (hot dipped galvanized sheet) and alloys of magnesium . It is recommended that test samples of materials in question be evaluated in the laboratory before using Ultimate industrial Descaler to treat lime or water scale deposits on these materials.
Concentrated Ultimate Industrial Descaler solution may discolor some chromed and stainless steel surfaces. It is recommended that Ultimate Industrial Descaler be diluted 1:1 with water before using on these surfaces.
Application . Ultimate Industrial Descaler is most effectively used by circulating through the equipment to be cleaned . When possible, circulation should be up-flow Ultimate Industrial Descaler can also be used by filling the equipment to be cleaned and allowing it to set until scale has disappeared, The cleaning operation normally takes two to six hours. The equipment should be vented at all times since carbon dioxide gas evolves during the disassociation of the
lime scale . For more detailed instructions, contact your Ultimate Industrial Descaler distributor
Availability. Ultimate Industrial Descaler is available in premium D.O.T. 34 approved 55 and 30 gallon reusable drums . It is also available in 5 gallon polyethylene pails.
Ultimate Industrial Descaler meets or exceeds government regulations. Ultimate Industrial Descaler is non-toxic, non-corrosive, non-flammable and nonhazardous when used as directed . The ingredients in Ultimate Industrial Descaler, when spent, are not listed as hazardous waste, nor does it possess any of the hazardous characteristics specified in 40 CRF 261 .
Ultimate Industrial Descaler has a low B.O.D. Ultimate Industrial Descaler is U.S.D.A. approved acceptable for use as an acid cleaner in all departments of official establishments operating under the Federal Meat, Poultry, Shell Egg Grading and Egg Products Inspection Program.
Ultimate Industrial Descaler meets all the requirements of the U.S . Department of Transportation regulations given in 173 .240 (a) for shipment without hazardous warning. Additional information on compliance with governmental regulations can be obtained by contacting AIP Industrial Products.
Ultimate Industrial Descaler is easy to use, environmentally friendly and exceeds government regulations.
Consider the following advantages of using Ultimate Industrial Descaler
• Does not require premixing
• Does not separate
• Changes color when spent
• Non-hazardous
• Non-Corrosive
• Non-Flammable
• Pleasant Odor
• Free Rinsing
• Low-Foaming
• Made in U.S.A
